Tuesday, May 27, 2008

Wacky Cisco 1721 Errors

*Mar 1 00:27:52.243: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload command.
System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 98304 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0xded8f8
Self decompressing the image : ################################################# ################################################################################ ################################################################################ ############################# [OK]


Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
MainBoard 0X00027A80 1721
0X000F3BB0 public buffer pools
0X00211000 public particle pools
VPN 0X00030C0C VPN Module Buffers
0X0011 0X0000DC00 Card in slot 1
TOTAL: 0X0036AE3C

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.



Allocating additional 8063910 bytes to IO Memory.
PMem allocated: 89015838 bytes; IOMem allocated: 11647458 bytes

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-ENTSERVICESK9-M), Version 12.3(26), RELEASE SOFTW ARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 17-Mar-08 14:24 by dchih


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco 1721 (MPC860P) processor (revision 0x300) with 86929K/11375K bytes of memo ry.
Processor board ID FOC08031ZU0 (3546652159), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)



Press RETURN to get started!


*Mar 1 00:00:03.267: %C1700-3-BADIMAGE: The IOS image loaded supports voice. T he platform you are running is not voice capable.

*Mar 1 00:00:03.267: %C1700-3-BADIMAGE: The IOS image loaded supports voice. T he platform you are running is not voice capable.

*Mar 1 00:00:05.311: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:06.319: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0, changed state to up
*Mar 1 00:00:11.167: SERVICE_MODULE(Serial0): self test finished: Passed
*Mar 1 00:00:12.691: %PA-3-NOTSUPPORTED: PA in slot3 (Unknown (type 65535)) is not supported on this image.
Please issue "show diag" in fully loaded IOS image
to get the PA's information and verify if it is supported
by this image, a newer version may be needed.Error: Unknown PM type

*Mar 1 00:00:16.483: %LINK-3-UPDOWN: Interface Serial0, changed state to down
*Mar 1 00:00:17.503: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:17.587: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, c hanged state to down
*Mar 1 00:00:17.587: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0, changed state to down
*Mar 1 00:00:19.219: %LINK-5-CHANGED: Interface FastEthernet0, changed state to administratively down
*Mar 1 00:00:19.219: %LINK-5-CHANGED: Interface Serial0, changed state to admin istratively down
*Mar 1 00:00:19.767: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-ENTSERVICESK9-M), Version 12.3(26), RELEASE SOFTW ARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 17-Mar-08 14:24 by dchih
*Mar 1 00:00:19.791: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
Router>ena
Router#sh diag
Slot 0:
C1721 1FE Mainboard Port adapter, 2 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 3.0
PCB Serial Number : FOC08031ZU0
Part Number : 73-7546-03
Board Revision : B0
Fab Version : 04
Product (FRU) Number : CISCO1721
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 5A 41 03 00 C1 8B 46 4F 43 30 38 30
0x10: 33 31 5A 55 30 82 49 1D 7A 03 42 42 30 02 04 FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC/VIC Slot 1:
FT1 8360
Hardware revision 1.5 Board revision G0
Serial number 0029877529 Part number 800-03279-04
FRU Part Number WIC-1DSU-T1=

Test history 0x00 RMA number 00-00-00
Connector type WAN Module
EEPROM format version 2
EEPROM contents (hex):
0x20: 02 11 01 05 01 C7 E5 19 50 0C CF 04 00 00 00 00
0x30: 80 00 00 00 03 03 23 01 FF FF FF FF FF FF FF FF

Slot 3:
Unknown (type 65535) Port adapter
Port adapter is disabled
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x10: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

No comments: